Uniden BCD436HP User Manual

Also see for BCD436HP: Owner's manual

Contents

Uniden BCD436HP User Manual Manual pdf 80 page image

74Search/Close Call OptionsThese are the settings you should look at before you perform a Quick Search, orClose Call Search.Press Menu. Scroll to Srch/CloCall Opt and press E/yes.Scroll to the options below and press E/yes.Freq Avoids Set Delay Time P25 Waiting TimeBroadcast Screen Set Attenuator P25 Threshold ModeRepeater Find Set Audio AGC P25 Threshold LevelFreq Avoids This allows you to review Avoided Frequencies or Stop Avoidingall Frequencies for Searching and Close Call search.Temporary Avoids appear reversed in the display- .Stop All Avoiding See also Search Avoids.At Confirm Delete? Press E/yes or .no.Rvw Search AvoidScroll to Frequency and press E/yes to Stop Avoiding.Broadcast Screen Automatically ignores transmissions that are on commonbroadcasts, paging systems, and other annoyance radio sources during CustomSearch, Quick Search, or Close Call Search. The default setting is Pager On.Set All Band On/Off Turns Broadcast Screen On or Off for All Bands.Set Each BandScroll to each Band and press E/yes to enable or disable.Program BandBand 1-10 Select for each Close Call Band.Set Lower/Upper Limit0-1000 MHzPress Menu to return and repeat for each band as needed.Repeater Find Sets whether the scanner tries to tune to a repeater outputfrequency when it detects a transmission on a repeater input frequency, in Searchand Close Call modes. Turning this feature on can let you hear both sides of theconversation on the output frequency. The default setting is Off.On or Off