Uniden BCD436HP User Manual

Also see for BCD436HP: Owner's manual

Contents

Uniden BCD436HP User Manual Manual pdf 8 page image

2Important InformationThis device complies with Part 15 of the FCC Rules. Operation is subject to thefollowing two conditions: (1) this device may not cause harmful interference, and(2) This device must accept any interference received, including interference thatmay cause undesired operation.This device complies with Industry Canada license-exempt RSS standard(s).Operation is subject to the following two conditions: (1) this device may not causeinterference, and (2) this device must accept any interference, includinginterference that may cause undesired operation of the device.Le présent appareil est conforme aux CNR d'Industrie Canada applicables auxappareils radio exempts de licence. L'exploitation est autorisée aux deuxconditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2)l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, mêmesi le brouillage est susceptible d'en compromettre le fonctionnement.General PrecautionsBefore you use this scanner, please read and observe the following:Earphone WarningYou can use an optional 32Ω stereo headset or earphone with your scanner. Useof an incorrect earphone or headset might be potentially hazardous to yourhearing. The output of the phone jack is monaural, but you will hear it in bothheadphones of a stereo headset.Set the volume to a comfortable audio level coming from the speaker beforeplugging in the earphone or headset. Otherwise, you might experience somediscomfort or possible hearing damage if the volume suddenly becomes too loudbecause of the volume control or squelch control setting. This might beparticularly true of the type of earphone that is placed in the ear canal.Liquid Exposure WarningUniden does not represent this unit to be waterproof. To reduce the risk of fire orelectrical shock, do not expose this unit to rain or moisture!Power Disconnection CautionImportant: Always turn the scanner off before disconnecting external power.Some settings are saved only as the scanner is powering down.