23Turning on the ScannerFuncMenuScroll Control(BCD436HP) Press and hold for about 2 seconds. If the screen is too dark,press to turn on the backlight. Rotate the scroll control clockwise and set thevolume to around 10 o’clock. Press the scroll control to display the volume level.Turn the scroll control (within 10 seconds) to adjust the volume. Press the scrollcontrol again to close the volume level (or let it disappear after 10 seconds).Press Func then press the scroll control to display the squelch level. Turn thescroll control counter-clockwise all the way then clockwise until the noise stops,then one notch more. Press the scroll control again to close the squelch level.(BCD536HP) Rotate VOL clockwise and set the volume to around 10 o’clock.Rotate the SQ knob counter-clockwise all the way, and then rotate the VOL knobto find a comfortable volume level. Rotate the SQ clockwise until the noise stops,then one notch more.The first time you turn on your scanner it will prompt you to set the clock.See Setting the Clock.To begin scanning right away, press the Zip button to select your country andzip/postal code (See Data Naming to enter postcode). The scanner will loadchannels for your area from the database and start scanning.
