Uniden BCD436HP User Manual

Also see for BCD436HP: Owner's manual

Contents

Uniden BCD436HP User Manual Manual pdf 66 page image

60Priority ScanningThe highest priority is for channels in Favorites List Quick Key 1 and SystemQuick Key 1. The lowest priority is for channels in Favorites List Quick Key 90and System Quick Key 90. Priority for priority channels in the same channelDepartment follows the order in which the channels were created.To use Priority Scan you must first set your Priority Channels.To use Priority ID Scan you must also enable Priority ID Scan for each system.To Toggle Priority Modes Press Func then .no.Priority Scan OptionsPress Menu then scroll to Priority Scan and press E/yes.Set Priority Set Interval MaxChannels/Pri-ScanSet Priority Sets the Priority Mode. You can also toggle these modes byholding on any channel in scan mode and pressing Func then .no(Pri).Off - The Priority feature is off.Priority DND - The scanner checks Priority channels only when not receivingother conventional channels.PRI appears in the display reversed- .Priority Scan - The scanner checks conventional priority channels, and priorityIDs within systems that have priority ID enabled.PRI appears in the display- .Set Interval This sets (in seconds) how often the scanner will check the prioritychannels.1-10 sec.MaxChannels/Pri-Scan This sets the maximum number of priority channelsthat are scanned during one priority scan interrupt. If there are more prioritychannels than the value you select, the channels are divided into more than onegroup and the scanner scans each group in turn. Example: If you set themaximum channels to 20 and there are 100 priority channels, the scanner checksthose 100 channels in groups of 20 and takes a total of 5 intervals to completethe priority scan.1-100