User’s Manual 4-21Operating BasicsInserting a discRemoving discs■ Tray ODDTo remove the disc, follow the steps below and refer to the figure.1. To pop open the drawer partially press the eject button. Gently pull thedrawer out until it is fully opened.2. The disc extends slightly over the sides of the drawer so you can hold it.Hold the disc gently by its edges and lift it out.TOSHIBASatelliteDo not press the eject button while the computer is accessing the discdrive. Wait for the optical media drive indicator to go out before you openthe drawer. Also, if the disc is spinning when you open the drawer, wait forit to stop before you remove it.■ When the drawer pops open slightly, wait a moment to make sure thedisc has stopped spinning before pulling the drawer fully open.■ Turn off the power before you use the eject hole. If the disc is spinningwhen you open the drawer, the disc could fly off the spindle and causeinjury.