Menu
Toshiba Qosmio X500 User Manual
Also see for Qosmio X500: User manualUser guideUser manualUser manualSpecifications
                                                                                                                                                                                                            |
User’s Manual 8-13Optional DevicesYou are now ready to watch 3D video on your 3D TV.Settings for audio on HDMITo set the audio device to use the HDMI:1. Click Start Control Panel Hardware and Sound Sound Digital Output Device (HDMI) Set Default Device.To set the audio device to use the internal speakers:1. Click Start Control Panel Hardware and Sound Sound Speakers Set Default Device.i.LINK (IEEE1394)i.LINK (IEEE1394) is used for high-speed data transfer for a range ofcompatible devices such as1. Digital video cameras2. Hard disk drives3. MO drives4. CD-RW drivesPrecautions1. Make a back-up of your data before transferring it to the computer.There is a possibility that the original data will be damaged. There is aparticular risk that some frames will be deleted in the case of digitalvideo transfer. TOSHIBA assumes no liability for such loss of data.2. Do not transfer data in areas where static electricity is easily generatedor in areas subjected to electronic noise. Data can be destroyed.3. If you are transferring data through an IEEE1394 hub, do not connect ordisconnect other devices from the hub during data transfer. There is alikelihood that data will be damaged. Connect all devices to the hubbefore you turn on the computer’s power.4. You may not use any copyrighted video or music data copied from avideo camera except for your personal enjoyment.5. If you connect/disconnect an i.LINK device to/from another i.LINKdevice that is currently exchanging data with the computer, data framesmight be dropped.6. Make sure data transfer has ended or turn off the computer, before you:a. Connect/disconnect an i.LINK device to/from the computer.b. Connect/disconnect an i.LINK device to/from another i.LINK devicethat is connected to the computer.i.LINK uses a four-pin connector, which does not carry electric current.External devices will need their own power supply. |
Related manuals for Toshiba Qosmio X500
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved