Toshiba Qosmio X500 User Manual

Also see for Qosmio X500: User manual User guide User manual User manual Specifications

User’s Manual 8-14Optional DevicesConnecting1. Make sure the connectors are properly aligned and plug the i.LINK(IEEE1394) cable into the computer.2. Plug the other end of the cable into the device.Note the following when you use i.LINK:a. You may need to install drivers for your i.LINK devices.b. Not all i.LINK devices have been tested. Therefore, compatibilitywith all i.LINK devices cannot be guaranteed.c. Use S100, S200 or S400 cables no longer than three meters.d. Some devices might not support sleep or automatic off functions.e. Do not connect or disconnect an i.LINK device while it is using anapplication or when the computer is automatically shutting it down tosave power. Data might be destroyed.f. When multiple IEEE1394 devices are connected to a PC, thedevices may not correctly be identified. This problem may occur whenWindows is restarted while the devices are connected or when thepower to the IEEE1394 devices is turned on before the PC is turned on.If this occurs, disconnect the IEEE1394 cables and then reconnectthem.Disconnecting1. Click the Safely Remove Hardware icon on the Task Bar.2. Select the i.LINK (IEEE1394) device that you want to remove.3. Disconnect the cable from the computer then from the i.LINK device.eSATA (External Serial ATA)An eSATA device can be connected to the eSATA/USB combo port on thecomputer.Connecting an eSATA deviceTo connect an eSATA device, follow the steps below:1. Connect an eSATA cable to the eSATA/USB combo port.Refer also to the documentation that came with your i.LINK device.Make sure the connector is properly aligned with the socket. Do not try toforce the connection. Doing so can damage the connecting pins.

/ 204

Related manuals for Toshiba Qosmio X500

Toshiba WT12PE-A Series User Manual

Toshiba Tecra Z50-C Series User Manual

This manual is suitable for:

Qosmio X500

Toshiba Qosmio X500 User Manual

Product

Learn More

Legal