Menu
Toshiba Qosmio X500 User Manual
Also see for Qosmio X500: User manualUser guideUser manualUser manualSpecifications
                                                                                                                                                                                                            |
User’s Manual 4-20Operating Basics4. Press gently at the centre of the disc until you feel it click into place. Thedisc should lie below the top of the spindle, aligned with the spindlebase.5. Push the center of the drawer to close it. Press gently until it locks intoplace.Closing the disc drawer■ Slot ODDTo load CD/DVD's, follow the steps as listed below and refer to followingfigures.1. When the computer's power is on, insert CD/DVD into the ODD directly.When the drawer is fully opened, the edge of the computer will extendslightly over the disc tray. Therefore, you will need to turn the disc at anangle when you place it in the tray. Once the disc is seated, make sure itlies flat, as shown in the figure above.■ Do not touch the laser lens. Doing so could cause misalignment.■ Keep foreign matter from entering the drive. Before closing the drive,check the back edge of the tray to make sure it carries no debris.If the disc is not seated properly when the drawer is closed, the disc mightbe damaged. Also, the drawer might not open fully when you press theeject button.TOSHIBASatellite |
Related manuals for Toshiba Qosmio X500
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved