Sony ZRD-1 Installation Manual

Also see for ZRCT-100: Operating instructions Operating instructions

2-34 (E) ZRD-1/ZRD-2/ZRCT-100/ZRCT-200(4) Align the display unit in the X and Y directions.Measuring device: Monitor of unit alignment toolAdjustment device: Eccentric pins (long) and hexagon wrenchesSpecification A (LED pitch): 1260 ?20 μmSpecification B (LED linearity): 0 ?80 μmnMove the eccentric pin (actually, move hexagon wrench) little by little.When you move one eccentric pin greatly at a time, it becomes stuck and the adjustment cannotbe made.t. “2-4-7. Adjustment Screen of Unit Alignment Tool”. “2-4-8. Adjustment Mechanism”Hexagon wrenchEccentric pin (long) Hexagon wrenchFor the alignment of LED pitch in theY direction around this area, rotatethe eccentric pin and hexagonwrench in the lower right portion.For the alignment of LED pitch in theY direction around this area, rotatethe eccentric pin and hexagon wrenchin the lower left portion.For the alignment of LED pitch in the X direction around this area, rotatethe eccentric pin and hexagon wrench in the upper portion of the side.For the alignment of LED pitch in the X direction around this area, rotatethe eccentric pin and hexagon wrench in the lower portion of the side.Eccentric pin (long)