Sony ZRD-1 Installation Manual

Also see for ZRCT-100: Operating instructions Operating instructions

6-47 (E)ZRD-1/ZRD-2/ZRCT-100/ZRCT-200System for 3D Frame Sequential mode (ZRCT-200 with version 1.22.0 or later)Input the 3D video signal (60 Hz or 120 Hz) to the DisplayPort connectors and input the 3D sync signal tothe 3D SYNC IN connector. From the display controller, the 3D video signal (120 Hz) is output.For the 3D video that is input to the display controller in 60 Hz, the signal is input in the order of L1signal→R1 signal→L2 signal→R2 signal∙∙∙, and the same video is output twice by repetition in the orderof L1 signal→R1 signal→L1 signal→R1 signal→L2 signal→R2 signal→L2 signal→R2 signal∙∙∙.For the 3D video that is input to the display controller in 120 Hz, the signal is input in the order of L1signal→R1 signal→L2 signal→R2 signal∙∙∙, and the video is output in the order of L1 signal→R1signal→L2 signal→R2 signal∙∙∙.From the 3D SYNC OUT connector, the 3D sync signal is output in accordance with the picture output’stiming, and then the 3D sync signal controls 3D glasses via an emitter.DisplayPort3D SYNC INL1 R1 L30 R303D sync signal (60/120 Hz)For 3D video that isinput in 120 Hz3D video signal (60 Hz)60/120 Hz3D sync signal (120 Hz)Emitter3D SYNC OUTL1 R1 L60 R603D video signal (120 Hz)L1 R1 L1 R13D video signal (120 Hz)L30 R30 L30 R30For 3D video that isinput in 120 HzL1 R1 L60 R603D video signal (120 Hz)