Siemens SIMATIC S5 Equipment Manual

Also see for SIMATIC S5: Manual Manual Manual Manual Manual

Matching Module 4 for Absolute Encoders R 02/92Maximum resolution = 20 bits + 1 control bitWithout being converted on the encoder matching module, the actual values are directly trans-ferred to the basic module via the output memory (when setpoints are presented in BCD code, theprocessing time of the basic module must be taken into account). Solder in jumper BR1 for“BCD/BIN”.7.3.2 Setting the Encoder Power SupplyThe required encoder supply voltage must be provided by circuitry of resistor R31 on the absoluteencoder matching module.Required voltage R31 Circuitry @ Pin No.+5 V/1 A @ @ 1.3 I& MBB 0207 32/48+ 12 Vll A @ 4.3 k~ MBB 0207 32/48+ 15 V/l A 0 5.6 k~ MBB 0207 32/48+ 24 V12 A No change required as the 24 V supply is fur– 49nished directly via a line from the Faston connec–tor on the basic module.0 See layout of the SS1 submodule in section 7.3.8.@ State as deiivered7 – 8 1P 241 Equipment Manual@ .Siemens AG 1989, Order No.: 6ES5 gg8-I)KD21Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com