Chapter 5Setup and ConfigurationRUGGEDCOM ROX IIUser Guide416 Deleting an Area TagParameter DescriptionArea Password The area password to be used for transmission of level-1 LSPs.Area Authentication Synopsis: send-only, validateDefault: send-onlyThe authentication option to be used with the area password on SNP PDUs. Default issend-only.Domain Authorization Synopsis: clear, md5Default: clearThe authorization type for the domain password. Default is clear.Domain Password The domain password to be used for transmission of level-2 LSPs.Domain Authentication Synopsis: send-only, validateDefault: send-onlyThe authentication option to be used with the domain password on SNP PDUs. Defaultis send-only.6. Add one or more Network Entity Titles (NETs). For more information, refer to Section 5.18.10, “ManagingNetwork Entity Titles (NETs)”7. If necessary, configure intervals for the generation of Link-State Packets (LSPs). The default is 30 seconds.For more information, refer to Section 5.18.6, “Managing LSP Generation”.8. If necessary, configure refresh intervals for Link-State Packets (LSPs). The default is 900 seconds. For moreinformation, refer to Section 5.18.9, “Managing LSP Refresh Intervals”.9. If necessary, configure the minimum interval between consecutive SPF calculations. The default is 1 second.For more information, refer to Section 5.18.7, “Managing SPF Calculations”.10. If necessary, configure how long LSPs can reside in the device's Link State Database (LSDB) before theyare refreshed. The default is 1200 seconds. For more information, refer to Section 5.18.8, “Managing theLifetime of LSPs”.11. If necessary, define rules for redistributing static, RIP, BGP or OSPF routes. For more information, refer toSection 5.18.11, “Managing Redistribution Metrics”12. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OKto proceed.13. Click Exit Transaction or continue making changes.Section 5.18.4.3Deleting an Area TagTo delete an area tag for dynamic IS-IS routes, do the following:1. Change the mode to Edit Private or Edit Exclusive.2. Navigate to routing » dynamic » isis » area. The Area Tag table appears.
