Chapter 5Setup and ConfigurationRUGGEDCOM ROX IIUser Guide398 Deleting a Masquerade or SNAT SettingParameter DescriptionOutgoing Interface Specifics (Optional) An outgoing interface list - specific IP destinations for the out-interface.IP Alias Create IP Alias for NAT rule.Source Hosts Subnet range or comma-separated list of hosts (IPs)SNAT Address (Optional) By specifying an address here, SNAT will be used and this will be the sourceaddress.description (Optional) The description string for this masq entry.7. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OKto proceed.8. Click Exit Transaction or continue making changes.Section 5.17.13.3Deleting a Masquerade or SNAT SettingTo delete a masquerade or SNAT setting, do the following:1. Change the mode to Edit Private or Edit Exclusive.2. Navigate to security » firewall » fwconfig » {firewall} » fwmasq, where {firewall} is the name of thefirewall. The Net Address Translation Main Settings table appears.2 31Figure 437: Net Address Translation Main Settings Table1. Add Button 2. Edit Button 3. Delete Button3. Click Delete next to the chosen masquerade or SNAT setting.4. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OKto proceed.5. Click Exit Transaction or continue making changes.
