OneStart
Menu
Home
Features
Browser
Partner
Coupons
Manuals
Blog
Download
Search
Manuals database
Brands
Siemens
Modem
Brodersen MC55
Siemens Brodersen MC55 AT Command Manual
Siemens Brodersen MC55 AT Command Manual
Also see for Brodersen MC55:
Command set
Table of content
Contents
Table Of Contents
Table Of Contents
Table Of Contents
Table Of Contents
Table Of Contents
Table Of Contents
Table Of Contents
Table Of Contents
Table Of Contents
Introduction
Related documents
Document conventions
Superscript notation for parameters and values
AT Command Syntax
Combining AT commands on the same command line
Supported character sets
Table 1.5: Examples for character definitions depending on alphabet
GSM alphabet tables and UCS2 character values
Figure 1.2: Extension character table of GSM 03.38 alphabet
UCS2 and GSM data coding and conversion for SMS text mode
Implementing input of Terminal data to SIM (direction TE to TA)
Serial Interface Flow Control
Unsolicited Result Code Presentation
Common PCN Handset Specification (CPHS)
Errors and Messages
Configuration Commands
AT&V Display current configuration
AT&V responses
AT&W Stores current configuration to user defined profile
ATQ Set result code presentation mode
ATV Set result code format mode
ATX Set CONNECT result code format and call monitoring
ATZ Set all current parameters to user defined profile
AT+CFUN Set phone functionality
parameter description
Wake up the ME from SLEEP mode
AT^SMSO Switch off mobile station
AT+GCAP Request complete TA capabilities list
AT+CMEE Mobile Equipment Error Message Format
CME/CMS Error Code Overview
Table 2.5: General "CME ERROR" Codes (SIEMENS)
AT+CSCS Select TE character set
AT^SCFG Extended Configuration Settings
AT^SM20 Set M20 compatibility mode
Status Control Commands
AT+CIND Indicator control
AT^SIND Extended Indicator Control
AT+CEER Extended Error Report
Cause Location ID for the extended error report
GSM release cause for L3 Radio Resource (RR)
GSM release cause for Mobility Management (MM) or Session Management (SM)
SIEMENS release cause for L3 Mobility Management (MM)
SIEMENS release cause for L3 Call Control (CC)
SIEMENS release cause for Call-related Supplementary Services (CRSS)
SIEMENS release cause for Session Management (SM)
ATS18 Extended call release report
AT+CPAS Mobile equipment activity status
AT+WS46 Select wireless network
Serial Interface Control Commands
AT&C Set Data Carrier Detect (DCD) Line mode
AT&D Set circuit Data Terminal Ready (DTR) function mode
AT&S Set circuit Data Set Ready (DSR) function mode
ATE Enable command echo
AT+ILRR Set TE-TA local rate reporting
AT+IPR Set fixed local rate
Autobauding
AT+CMUX Enter multiplex mode
Restrictions on Multiplex mode
Table 4.2: Summary of AT commands with Different Behavior in Multiplex Mode
Second serial interface ASC1
Security Commands
What to do if PIN or password authentication fails
AT+CPIN2 PIN2 Authentication
AT^SPIC Display PIN counter
AT+CLCK Facility lock
AT^SLCK Facility lock
AT+CPWD Change Password
AT^SPWD Change Password
Identification Commands
AT+CGMI Request manufacturer identification
AT+CGMM Request model identification
AT+CGMR Request revision identification of software status
AT+CGSN Request International Mobile Equipment Identity (IMEI)
AT+CIMI Request International Mobile Subscriber Identity (IMSI)
Call related Commands
ATA Answer a call
ATD Mobile originated call to specified number
ATD><mem><n> Mobile originated call using specific memory and index number
ATD><n> Mobile originated call from active memory using index number
ATDI Mobile originated call to ISDN number
ATDL Redial last number used
ATH Disconnect existing connection
AT+CHUP Hang up call
ATS0 Set number of rings before automatically answering a call
ATS6 Set pause before blind dialing
ATS7 Set number of seconds to wait for connection completion
ATS8 Set number of seconds to wait for comma dialing modifier
ATS10 Set disconnect delay after indicating the absence of data carrier
ATO Switch from command mode to data mode / PPP online mode
Switch from data mode to command mode
AT+CBST Select bearer service type
AT+CRLP Select radio link protocol parameters for originated non-transparent data calls
AT+CLCC List current calls of ME
AT^SLCC Siemens defined command to list current calls of ME
AT+CR Service reporting control
AT+CRC Set Cellular Result Codes for incoming call indication
AT+CSNS Single Numbering Scheme
AT^SCNI List Call Number Information
AT^SLCD Display Last Call Duration
AT^STCD Display Total Call Duration
ATP Select pulse dialing
Network Service Commands
AT+COPS Operator Selection
AT^SOPS Extended Operator Selection
AT+CREG Network registration
AT+CSQ Signal quality
AT^SMONC Cell Monitoring
AT^SMOND Cell Monitoring
AT^MONI Monitor idle mode and dedicated mode
AT^MONI responses
Service states
AT^MONP Monitor neighbour cells
AT^MONP responses
AT^SMONG GPRS Monitor
AT^SMONG Cell Info Table
AT^SALS Alternate Line Service
AT^SHOM Display Homezone
AT^SPLM Read the PLMN list
AT+CPOL Preferred Operator List
AT^SPLR Read entry from the preferred operators list
AT^SPLW Write an entry to the preferred operators list
Supplementary Service Commands
AT^SACM Advice of charge and query of ACM and ACMmax
AT+CAMM Accumulated call meter maximum (ACMmax) set or query
AT+CAOC Advice of Charge information
AT+CCUG Closed User Group
AT+CCFC Call forwarding number and conditions control
AT+CCWA Call Waiting
AT+CHLD Call Hold and Multiparty
AT+CLIP Calling Line Identification Presentation
AT+CLIR Calling line identification restriction
AT+COLP Connected Line Identification Presentation
AT+CPUC Price per unit and currency table
AT+CSSN Supplementary service notifications
AT+CUSD Supplementary service notifications
Internet Service Commands
AT^SICS Internet Connection Setup Profile
Example: Default values of a CSD connection profile
Example: GPRS connection profile
AT^SICI Internet Connection Information
Checking Connection Profile Status
AT^SISS Internet Service Setup Profile
AT^SISI Internet Service Information
AT^SISO Internet Service Open
Example: Accepting / Rejecting Socket Connection Request from Remote Client
AT^SISC Internet Service Close
AT^SISR Internet Service Read Data
Example: Socket Host Reads Small Amounts of UDP Data Packets (URC Mode)
AT^SISW Internet Service Write Data
Usage of parameter <eodFlag
AT^SISE Internet Service Error Report
Internet Service URC "^SIS
Information Elements Related to the Service Application
Information Elements Related to FTP Service
Information Elements Related to HTTP Service
Examples of how to Configure and Use Internet Service Profiles
Configuring Socket Client for Calling a Socket Listener on Another Host
Socket client sends data via TCP connection with URCs
Configuring and Using FTP Upload (URC Mode)
Sending Email (URC Mode)
Sending Email (Polling Mode)
Configuring POP3 Service Profile
Retrieving Email (Polling Mode)
HTTP POST (Polling Mode)
HTTP GET (Polling Mode)
GPRS Commands
AT+CGANS Manual response to a network request for PDP context activation
AT+CGATT GPRS attach or detach
AT+CGAUTO Automatic response to a network request for PDP context activation
AT+CGEREP GPRS event reporting
AT+CGDATA Enter data state
Automatic deactivation of PDP context during dial-up PPP
AT+CGDCONT Define PDP Context
AT+CGPADDR Show PDP address
AT+CGQMIN Quality of Service Profile (Minimum acceptable)
AT+CGQREQ Quality of Service Profile (Requested)
AT+CGREG GPRS Network Registration Status
AT+CGSMS Select service for MO SMS messages
AT^SGAUTH Set type of authentication for PPP connection
AT^SGCONF Configuration of GPRS related Parameters
ATA Manual response to a network request for PDP context activation
ATD*99# Request GPRS service
ATD*98# Request GPRS IP service
ATH Manual rejection of a network request for PDP context activation
ATS0 Automatic response to a network request for PDP context activation
Using GPRS AT commands (Examples)
Using the GPRS dial command ATD
FAX Commands
Summary of Fax Class 2 URCs defined by EIA PN-2388
AT+FBADLIN Bad Line Threshold
AT+FBADMUL Error Threshold Multiplier
AT+FBOR Query data Bit Order
AT+FCIG Query or set the Local Polling ID
AT+FCLASS Fax: Select, read or test service class
AT+FCQ Copy Quality Checking
AT+FCR Capability to Receive
AT+FDCC Query or set capabilities
AT+FDFFC Data Compression Format Conversion
AT+FDIS Query or set session parameters
AT+FDR Begin or continue phase C Data Reception
AT+FDT Data Transmission
AT+FET End a page or document
AT+FK Kill operation, orderly FAX abort
AT+FLID Query or set the Local Id setting capabilities
AT+FMDL Identify Product Model
AT+FMFR Request Manufacturer Identification
AT+FOPT Set bit Order independently
AT+FPHCTO DTE Phase C Response Timeout
AT+FREV Identify Product Revision
AT+FRH Receive Data Using HDLC Framing
AT+FRM Receive Data
AT+FRS Receive Silence
AT+FTH Transmit Data Using HDLC Framing
AT+FTM Transmit Data
AT+FTS Stop Transmission and Wait
AT+FVRFC Vertical Resolution Format Conversion
Short Message Service (SMS) Commands
AT+CMGC Send an SMS command
AT+CMGD Delete short message
AT+CMGF Select SMS message format
AT+CMGL List SMS messages from preferred store
AT+CMGR Read SMS messages
AT+CMGS Send Short Message
AT+CMGW Write Short Messages to Memory
AT+CMSS Send short messages from storage
AT+CNMA New Message Acknowledgement to ME/TE, only phase 2
AT+CNMI New short Message Indication
AT+CPMS Preferred SMS message storage
AT+CSCA SMS Service Center Address
AT+CSCB Select Cell Broadcast Message Indication
AT+CSDH Show SMS text mode parameters
AT+CSMP Set SMS text Mode Parameters
AT+CSMS Select Message Service
AT^SLMS List SMS Memory Storage
AT^SMGL List Short Messages from preferred store without setting status to REC READ
AT^SMGO Set or query SMS overflow presentation mode or query SMS overflow
AT^SMGR Read short message without setting status to REC READ
AT^SSCONF SMS Command Configuration
AT^SSDA Set SMS Display Availability
AT^SSMSS Set Short Message Storage Sequence
SIM related Commands
AT^SXSM Extended SIM Access
AT^SCKS Query SIM and Chip Card Holder Status
AT^SCID Display SIM card identification number
AT+CXXCID Display card ID
SIM Application Toolkit (SAT) Commands
SSTN SAT Notification
AT^SSTGI SAT Get Information
AT^SSTR SAT Response
Phonebook Commands
AT+CPBR Read from Phonebook
AT+CPBS Select phonebook memory storage
AT+CPBW Write into Phonebook
AT^SPBC Find first matching entry in sorted phonebook
AT^SPBD Purge phonebook memory storage
AT^SPBG Display phonebook entries in alphabetical order
AT^SPBS Step through the selected phonebook alphabetically
AT+CNUM Read own numbers
AT^SDLD Delete the 'last number redial' memory
Audio Commands
ATL Set monitor speaker loudness
AT+CLVL Loudspeaker volume level
AT+CMUT Mute control
AT+VTD Tone duration
AT+VTS DTMF and tone generation
AT^SAIC Audio Interface Configuration
AT^SNFA Set or query of microphone attenuation
AT^SNFD Set audio parameters to manufacturer default values
AT^SNFI Set microphone path parameters
AT^SNFM Set microphone audio path and power supply
AT^SNFO Set audio output (= loudspeaker path) parameter
AT^SNFPT Set progress tones
AT^SNFS Select audio hardware set
AT^SNFTTY Signal TTY/CTM audio mode capability
AT^SNFV Set loudspeaker volume
AT^SNFW Write audio setting in non-volatile store
AT^SRTC Ring tone configuration
Hardware related Commands
AT+CALA Set alarm time
AT^SBC Battery Charge Control
Responses returned by read command
AT^SBV Battery/Supply Voltage
AT^SCTM Set critical operating temperature presentation mode or query temperature
AT^SSYNC Configure SYNC Pin
ME status indicated by status LED patterns
Miscellaneous Commands
ATS3 Set command line termination character
ATS4 Set response formatting character
ATS5 Write command line editing character
Appendix
Star-Hash (*#) Network Commands
Table 20.3: Star-Hash Command Response Parameters
Available AT Commands and Dependency on SIM PIN
Availability of AT Commands Depending on Operating Mode of ME
AT Command Settings storable with AT&W
Table 20.8: Settings Stored to User Profile on ASC1 / MUX Channels 2 and 3
Factory Default Settings Restorable with AT&F
Summary of Unsolicited Result Codes (URC)
Alphabetical List of AT Commands
1
AT Command Manual
for
Brodersen Products with Siemens MC55
Modem Engine
V. 04.00 / April 2006 / Doc 40232
Brodersen Controls A/S
●
Industrivej 3
●
DK-4000 Roskilde
●
Tel: +45 46 74 00 00
●
Fax: +45 46 75 73 36
E-mail: bc@brodersencontrols.com
●
Internet: www.brodersencontrols.com
Next
/ 475
Zoom view
Related manuals for Siemens Brodersen MC55
Siemens MD720-3 Manual
Siemens 7XV5655-0BB00 Manual
Siemens 7XV5655-0BB00 Manual
Siemens TC35i User Manual
Siemens SIMATIC S7-300 Manual
Siemens MC35 Terminal User Manual
Siemens C2-010 Quick Start Manual
Siemens TC35i Migration Manual
Siemens SE366 Quick Start Manual
Siemens TC35 Terminal User Manual
This manual is suitable for:
Brodersen MC55
Brodersen MC55 AT