Siemens Brodersen MC55 AT Command Manual

Also see for Brodersen MC55: Command set

Contents

MC55_ATC_V04.00 Page 377 of 475 3/17/06Confidential / ReleasedParameter DescriptionMC55 Remote-SAT interface states0 RESET1 OFF2 IDLE3 PAC4 WAIT0 GSM character setInput of a character requests one byte, e.g. "Y".1 UCS2To display the 16 bit value of characters represented in UCS2 alphabet a 4 bytestring is required, e.g. "0059" is coding the character "Y". For details pleaserefer to ISO/IEC 10646.0 SAT is already used on another instance (logical channel in case of the multi-plex protocol). Only test and read commands can be used.1 SAT may be started on this instance via the write version of this command.SAT profile according to GSM 11.14 [22].The profile tells the SIM Application which features (e.g. proactive commands) are supported by the SIM Appli-cation Toolkit implementation of the MC55.1 Activate Remote-SATNote• To limit the time Remote-SAT is kept in states PAC or WAIT any ongoing (but unanswered) Proactive Com-mand is automatically aborted after 10 minutes with Terminal Response "ME currently unable to process com-mand" or "No response from user" if applicable. An URC "Terminate Proactive Command" will be send to theexternal application in this case, too.(num)(num)(num)(str)(num)