Sealey LED01 Series Instruction Manual

Also see for LED01 Series: Instruction manual

2 COB + 1 reChargeaBle slim fOldingpOCket lightmodel no: led01 seriesthank you for purchasing a sealey product. manufactured to a high standard, this product will, if used according to these instructions,and properly maintained, give you years of trouble free performance.impOrtant: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USETHE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/ORPERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.1. safetY1.1. general9 It is important to ensure that the lamp is fully charged before initial use.8 dO nOt turn the lamp on when it is being charged.8 dO nOt shine directly into your, another person’s or an animal’s eyes.8 dO nOt allow children to use the lamp.8 dO nOt leave battery in a discharged state. Recharge battery immediately.Recharge the battery at least once every six months of non-use.9 There are no user serviceable components. dO nOt dismantle.8 dO nOt pull the charger plug from the mains socket by the lead.1.2. BatterY safetY Warning! To reduce the risk of burns or fire:8 dO nOt Attempt to open, disassemble, modify or service the battery pack.8 dO nOt Crush, puncture, short external contacts or dispose of in fire or water.8 dO nOt expose to temperatures above 60°C (140°F).9 Recycle or dispose of used battery as stipulated by local regulation.9 If the electrolyte in the cells gets on your skin, thoroughly wash with soap and water. If it gets in your eyes, rinse thoroughly with coolwater and seek immediate medical attention2. intrOduCtiOnSlimline pocket lamp for use in confined spaces. Inspection arm can be folded 180º for hands-free use. Super bright COB and SMD LED, 6000-7000k, 80+CRI. High impact plastic housing with aluminium light and a strong magnet on the bottom. Rechargeable high quality 3.7V 700AhLi-ion battery with a charging time of 2.5 hours. Supplied with USB charging cable.3. speCifiCatiOnmodel no.......................................................... led01 SeriesBattery ....................................................3.7V 700mAh Li-ionled Quantity ................................................ 2 COB + 1 SMDlumen output:Top spotlight .................................................................. 80lm,Front (High/Low) ................................................200lm/100lmRear ............................................................................. 180lmoperating time:Top spotlight ......................................................................3hrFront .....................................................................3.5hr/1.5hrRear ..................................................................................2hrCharging time: ................................................................2.5hrlength:Folded .........................................................165 x 20 x 28mmextended .....................................................300 x 20 x 28mm4. Charging4.1. The battery fitted to this lamp is considered to be a consumable item and its ability to accept charge will reduce over time. We willwarranty it against mechanical and electrical defect for a period of one year, this does not cover fair wear and tear. If the battery is notproperly charged before first use, or regularly conditioned, its capacity will diminish. Under these circumstances we will not replace thebattery even if it is less than one year old.4.2. Connect the charger into the charge port on the lamp, see fig.1. Plug into power supply and turn on, the green charge indicator led onthe lamp will flash as the battery charges. When fully charged the led turns to continuous green.4.3. Charge the battery for 4-5 hours for its initial charge. normal charge time is approx 2.5hrs. disconnect from mains supply.lED01 Series| Issue1 17/09/19Original Language Version© Jack Sealey limitedRefer toinstructionmanual

/ 2

Related manuals for Sealey LED01 Series