Samsung iDCS 500 User Manual

Also see for iDCS 500: User guide User guide Administration guide User instruction General description

47DISPLAY FEATURESINTERACTIVE DISPLAY KEYSThe three keys below the display are substitutes for dedicated feature keysand access codes. Pressing one of these keys has the same effect as press-ing a programmable key. These keys are called soft keys as their functionsare not fixed. They change to present you with the best options for that callcondition. The use of soft keys allows the programmable keys to be used formore DSS and speed dial keys.The SCROLL key is used to display options available to the user at a partic-ular time or during a specific procedure. Press this key once while in the idlestate to view the three main categories available.201: STN NAMECALL OTHER ANSANSWER: Guides you through the options to answer calls.OTHER: Guides you through features other than making or answering calls.CALL: Guides you through the options to make a call.Select one of the main categories: CALL, OTHER or ANS (ANSWER). Pressthe SCROLL key to display additional options available under each of thethree main categories. The symbol ➡ displayed as the last character on thelower line of the display indicates that there are additional options. Press theSCROLL key to display these additional options.User instructions will be displayed in lower case letters. Options assigned tosoft keys will be in upper case letters.DIRECTORY INFORMATIONAn 11 character directory name can be assigned to each extension number.Display keyset users can view the name of the called or calling station beforeanswering.Each outside line can have an 11 character directory name. Incoming callscan be easily identified and answered with different greetings.Outside and internal calls ringing to a station group will display [CALL FORxxx] where xxx is the station group number. This allows you to answer callsdirected to you differently than calls directed to your group.DISPLAY SPEED DIAL NAME [L VERSION]This option allows you to view the name associated with a speed dial num-ber as it is dialed.• With you handset on-hook, press TRANSFER and then dial 110.• Press 111 to turn DISP SPDNAME on or 110 to turn it off.• Press TRANSFER to store your selection.CALLER ID REVIEW ALL [L VERSION ONLY]This feature allows display keyset users to review Caller ID information forcalls sent to their stations. This list can be from ten to fifty calls in a first in,first out basis. The list includes calls that you answered and calls that rangyour station but that you did not answer. When reviewing this list, you canpress one button to dial the person back. The system must be using LCR todial the stored number.• With you handset on-hook, press TRANSFER and then dial 110.• Press 121 to turn CID REVIEW ALL on or 120 to turn it off.• Press TRANSFER to store your selection.SECURE OHVA [L VERSION ONLY]This option allows you to receive OHVA calls via the speaker while you areon the handset.• With you handset on-hook, press TRANSFER and then dial 110.• Press 131 to turn AUTO CAMP-ON on or 130 to turn it off.• Press TRANSFER to store your selection.46