Samsung iDCS 500 User Manual

Also see for iDCS 500: User guide User guide Administration guide User instruction General description

• The A key is not used.• The B key inserts a flash.• The C key inserts a pause.• The D key is used for pulse to tone conversion. If your system usesrotary (or pulse) dialing C.O. lines, pressing D while entering a speeddial number causes all subsequent digits to be sent as DTMF tones.• The E key is used to hide digits. Display keyset users may want to hidesome speed dial numbers so that they will not show in the display. Whenyou are entering a telephone number, press E. All subsequent digits willbe hidden. Press E again to begin displaying digits.• The F key is used to enter a name. See Personal Speed Dial Namesunder Display Features.• Use the HOLD key to clear a speed dial number.ONE TOUCH SPEED DIALINGYou may assign any speed dial number to an already existing One TouchSpeed Dial button for quick and easy dialing of frequently used numbers.• While on-hook, press TRANSFER and then dial 107.• Press a One Touch Speed Dial button.• Dial the speed dial number (00–49 or 500–999) that you want assignedto this button.• Press TRANSFER to store your selection.To call this telephone number, just press the One Touch Speed Dial button.NOTE: If the Hot Keypad feature has been turned off, you must first lift thehandset or press the SPEAKER key before you begin dialing.LAST NUMBER REDIALTo redial the last telephone number you dialed, press the REDIAL key or dial19.NOTES:1. If the Hot Keypad feature has been turned off, you must first lift the hand-set or press the SPEAKER key before you begin dialing.2. Redial does not apply to intercom calls.2928DIALING FEATURESSPEED DIALINGYou can dial a preprogrammed telephone number stored in the system-widespeed dial list of numbers 500–999 or from your personal list of numbers00–49:• With the handset on-hook, press the MEMORY key or dial 16.• Dial the desired speed dial number.• The telephone number is automatically dialed for you.NOTE: If the Hot Keypad feature has been turned off, you must first lift thehandset or press the SPEAKER key before you begin dialing.PROGRAMMING PERSONAL SPEEDDIAL NUMBERSYou can program frequently dialed telephone numbers in a personal speeddial list. A station may be assigned up to fifty numbers, 00–49. See your sys-tem administrator to determine the amount assigned to your station.• While on-hook, press TRANSFER and then dial 105.• Dial a speed dial number (00–49).• Dial a line or line group access code.• Dial the telephone number to be stored (24 digits maximum). It can in-clude #, ✱, FLASH and PAUSE.• Press TRANSFER to store the number.NOTE: If the Hot Keypad feature has been turned off, you must first lift thehandset or press the SPEAKER key before you begin dialing.For the purposes of programming speed dial numbers, the programmablekeys are known as A, B, C, D, E and F and are defined below.Transfer SpeakerA BC DE FA C ETransferSpeakerVOLUMEB D F28D KEYSET18D KEYSETDEFAULTPROGRAMMINGKEYS LAYOUT8D KEYSET DEFAULTPROGRAMMINGKEYS LAYOUT