Samsung iDCS 500 User Manual

Also see for iDCS 500: User guide User guide Administration guide User instruction General description

FORWARD DNDTo forward your phone when you activate DND.• Dial 607 plus the extension number or group number.• Receive confirmation tone and hang up.NOTE:1. If the Hot Keypad feature has been turned off you must first lift the hand-set or press the SPEAKER key before you begin dialing.CALL FORWARD OPTIONSA display keyset may review or change call forward options and destina-tions. Call forward access can be done via the keypad or by accessing thekeyset display features. To review or change call forward options:• Press TRANSFER 102.• Dial 0-6 to select the forward type (e.g., 1) ORPress UP or DOWN to select the forward typePress the right soft key to move the cursor• Dial the destination number (e.g., 202) ORPress UP or DOWN to select the destinationPress the right soft key to move the cursor• Dial 1 to set ORPress UP or DOWN to select YES or NO• Press TRANSFER to store and exitSTATION CALL PICKUPTo pick up (answer) a call ringing at another station, lift the handset and dial65 plus the extension number of the ringing phone.NOTE: If the Hot Keypad feature has been turned off, you must first lift thehandset or press the SPEAKER key before you begin dialing.GROUP CALL PICKUPTo pick up (answer) a call ringing in any pickup group, lift the handset anddial 66 plus the desired group number 01–20 or press the flashing GROUPPICKUP key if available.NOTES:1. A group pickup key can have an extender for a specific pickup group.2. If the Hot Keypad feature has been turned off, you must first lift the hand-set or press the SPEAKER key before dialing the access code.25FORWARD BUSY/NO ANSWERIf you have both a Forward on Busy destination and a Forward No Answerdestination programmed, you may set both of these at the same time:• Dial 604.• Receive confirmation tone and hang up.NOTE: If the Hot Keypad feature has been turned off, you must first lift thehandset or press the SPEAKER key before you begin dialing.FORWARD FOLLOW MEWhen you want all calls to your extension forwarded to the extension whereyou are now:• Dial 605 plus your extension number.• Receive confirmation tone and hang up.If you want a specific extension's calls forwarded to your phone (Remote CallForward):• Dial 605 plus the desired extension number.• Receive confirmation tone and hang up.NOTE: If the Hot Keypad feature has been turned off, you must first lift thehandset or press the SPEAKER key before you begin dialing.FORWARD TO AN EXTERNAL NUMBERTo forward outside calls to a number outside of your business, you musthave a FWD EXTERNAL button on your keyset.• While on-hook, press TRANSFER and then dial 102.• Dial 6.• Dial the outside line access code followed by the telephone number thatyou want.• Press TRANSFER to store.• Press FWD EXTERNAL to turn the feature on and press it again to turnthe feature off.NOTES:1. External Call Forward will cancel all other call forwarding instructions.2. If the Hot Keypad feature has been turned off, you must first lift the hand-set or press the SPEAKER key before you begin dialing.3. Intercom calls to your station may be forwarded to an external numberoutside your business, if your installation company has enabled this fea-ture.24