OneStart

Menu
Samsung SVD-4332 User Manual Manual pdf 9 page image

Samsung SVD-4332 User Manual

Page 1 previewPage 2 previewPage 3 previewPage 4 previewPage 5 previewPage 6 previewPage 7 previewPage 8 previewPage 9 previewPage 10 previewPage 11 previewPage 12 previewPage 13 previewPage 14 previewPage 15 previewPage 16 previewPage 17 preview
Contents
  1. Table Of Contents
  2. Safety Precautions
  3. When a visitor is outside the entrance
  4. Checking outdoor status
  5. Setting the melody type
  6. Deleting all stored images
  7. Setting the Camera Quantity
  8. Setting the Open Time
  9. Setting the Video mode
  10. Auto-recording of missed visitor images
  11. Door Camera
  12. Monitors + 2 Door Cameras (2 Door locks)
  13. Monitors + 1 Door Camera + 1 Multi Panel
Samsung SVD-4332 User Manual Manual pdf 9 page image
4VQFSWJTPSTFUUJOH'VODUJPOT11OperationChapter 21. Remove the J1 Jumper on the SVD-4332’s bottom to enter supervisor mode.(refer to 25 page)2. Press the SET button to select a desired supervisor setting item.3. Press + / - button to select the value for selected setting item.< SUPERVISOR MODE >1. ID SET MASTER2. CAMERA QUANTITY 13. BELL SET RELEASE4. MULTI LOBBY SET RELEASE5. DOOR1 OPEN SET MAIN6. DOOR2 OPEN SET MAIN7. DOOR1 OPEN TIME SET 1SEC8. DOOR2 OPEN TIME SET 1SEC9. DOOR1 CALL TIME SET 1MINA. DOOR2 CALL TIME SET 1MINB. SLAVE CALL TIME SET 1MINC. DOOR1 TALK TIME SET 3MIND. DOOR2 TALK TIME SET 3MINE. SLAVE TALK TIME SET 3MINM. NAND BULK ADJUST NON. VIDEO MODE SELECT NTSCO. SUPERVISOR DEFAULT NOQ. CHROMA DELAY 1SECR. STORAGE IMAGE NUM 128-.---.-.-.-----.---.-.-.---..-.---.-..---.------.--.----.----.---.-.-...---.-.-.-.---.--.-.----.-----.ⶺEntering for supervisor setting mode-.---.-.-.-----.---.-.-.---..-.---.-..---.-------.----.---.-.-...---.-.---..-.---.-..---1. During the Supervisor setting mode, press the SET button repeatedly to select 1.ID SET.2. Press the + / - buttons repeatedly to select the Master, Slave 1, Slave 2 or Slave 3.3. Press the Interphone button to store your setting, then exit.-.---.-.-.-----.---.-.-.---..-.---.-..---.-------.----.---.-.-...---.-.---..-.---.-..---ⶺSetting the IDSet to the Master or Slave mode, and select to Slave’s ID.ⷅAfter connecting to the slave unit, be sure to set the SLAVE ID without overlap.Do not overlap the SLAVE ID when multi-units are connected, it may cause malfunction of the master or the slave unit.ⷅTo save and exit your settings, press the Interphone button.These functions are used to customize some product functions in the user’s environment.10These functions are used to customize some product functions in the user’s environment.6TFS4FUUJOH'VODUJPOT-.---.-.-.-----.---.-.-.---..-.---.-..---.-------.----.---.-.-...---.-.---..-.---.-..---1. During the standby mode, press the SET button repeatedly to select the 5.ALL IMAGE DELETE.2. Press the + / - buttons to select the YES or NO.YES : perform the deleting all images NO : cancel the deleting all images3. To excute the selected condition, press the Interphone button.-.---.-.-.-----.---.-.-.---..-.---.-..---.-------.----.---.-.-...---.-.---..-.---.-..---ⶺDeleting all stored imagesⷅTo exit the user setting mode, select F.EXIT, and then press the Interphone button to save your settings.In addition, if there is no input for more than 10 seconds, the mode is automatically ended.-.---.-.-.-----.---.-.-.---..-.---.-..---.-------.----.---.-.-...---.-.---..-.---.-..---1. During the standby mode, press the SET button repeatedly to select the 6. FACTORY DEFAULT.2. Press the + / - buttons to select the YES or NO.Yes : Perform the initialization No : Cancel the initialization3. To excute the selected condition, press the Interphone button.-.---.-.-.-----.---.-.-.---..-.---.-..---.-------.----.---.-.-...---.-.---..-.---.-..---ⶺSystem initializationⷅTo exit the user setting mode, select F.EXIT, and thenpress the Interphone button to save your settings.In addition, if there is no input for more than 10seconds, the mode is automatically ended.ⷅDefault setting values- Door 1 melody : Ding-dong 1- Door 2 melody : Ding-dong 2- Slave melody : Ding-dong 3- Voice volume/melody volume : 2 levels- Color/Contrast/Brightness : 2 levels
/ 17
Related manuals for Samsung SVD-4332
Samsung SHT-8610 User Manual first page preview
Samsung SHT-8610 User Manual
Samsung SHT-5180XL/EN User Manual first page preview
Samsung SHT-5180XL/EN User Manual
Samsung Ezon SHT-3006XM User Manual first page preview
Samsung Ezon SHT-3006XM User Manual
Samsung CCTV SDV-410Y Quick Start Instructions first page preview
Samsung CCTV SDV-410Y Quick Start Instructions
This manual is suitable for:
SVD-4332SVD-4332W
Product
Menu
Learn More
Menu
Legal
Menu
Copyright © 2024 OneStart. All Rights Reserved