21InstallationChapter 3$BNFSB*OTUBMMBUJPO%SBXJOHⶺDoor Camera)PXUPJOTUBMM1. Select a place to install the product.(Install the door camera and place the center of the camera at a height of 145 cm from the floor.)2. Fix the wall mount bracket on the selected place with 2 screws.3. Connect the connection wire of the Monitor to the door camera terminal.4. Check that the Monitor can be called.$BVUJPOTGPSJOTUBMMBUJPO1. Avoid the direct sunlight, or a place where rainwater spatters, or it is near chemicals and high voltagepower lines.2. Do not install in a place with too high or too low temperatures if possible.ⷀ SVC - 0270P ⷀ SVC - 0271Mⷀ SVC - 0270M20*OTUBMMBUJPO1SPEVDU*OTUBMMBUJPO%SBXJOH - Installation method and height of Monitor.ⶺMonitor1. Select a place to install the product.(Install the product and place the center ofthe Monitor at a height of 145 cm from thefloor.)2. Fix the wall mount bracket on the selectedplace with 2 screws.3. Connect the wires of the door camera andinterphone (optional) to the Monitor terminal.4. After mounting the Monitor on the bracket,secure it with screws on the bottom of theMonitor.5. Connect the AC power cord.6. Turn on the power switch on the bottom ofthe product and make sure that the power isapplied.)PXUPJOTUBMM