Menu
Samsung CCTV SDV-410Y Quick Start Instructions
  |
Samsung CCTV SDV-410Y QuickStart InstructionsSetting up SDV-410Y Video IntercomSystemThis system is simple to install. It uses afour (4) conductor wire connection for theinitial installation.Step 1: Mount the Camera1. For the SDV-410Y unit, using thecamera outside with a wall mount,secure to the wall using spacers andscrews provided.2. Remember: never aim the cameradirectly at sunlight. The iris willhave a very hard time adjusting tothe light.Step 2: connect the System to the CameraSee Figures 11. The four connections that are made from the camera to the monitor will connect to thecorresponding connection on both units.2. Connect a wire to the “1R (12v DC)” on the back of the monitor to the back of thecamera, “1R”. Use standard 24-gauge low voltage wire.3. Then, connect “2W (GND)” from the monitor to “2W” on the camera.4. Next, “3Y” (Video)” from the monitor to “3Y” on the camera.For 2W & 3Y:Up to 50’- Use 24 gauge CAT5 cableUp to 200’ – Use 18 gauge CAT5 cableOver 200’ – Use RG6 Coax Cable, the inner coax in connected to 3Y and the shield isconnected to 2W.5. Finally, connect “4B (audio)” from the monitor o the camera, “4B”. Use 18 gauge CAT5cable. |
Related manuals for Samsung CCTV SDV-410Y
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved