Basic copying622. Menu Overview and Basic SetupReduced or enlarged copyYou can reduce or enlarge the size of a copied image from 25% to 400% from thedocument feeder or scanner glass.• This feature may not be available depending on model or optional goods(see "Variety feature" on page 10).• If the machine set to Eco mode, reduce and enlarge features are notavailable.To select from the predefined copy sizes1 CLX-330x Series/CLX-330xW Series: Make sure that the Scan to button’sLED is off.CLX-330xFN Series/CLX-330xFW Series: Select (copy) on the controlpanel.2 Select (Menu) > Copy Feature > Reduce/Enlarge on the controlpanel.3 Select the option you want and press OK.4 Press (Stop/Clear) to return to ready mode.To scale the copy by directly entering the scale rate1 CLX-330x Series/CLX-330xW Series: Make sure that the Scan to button’sLED is off.CLX-330xFN Series/CLX-330xFW Series: Select (copy) on the controlpanel.2 Select (Menu) > Copy Feature > Reduce/Enlarge > Custom on thecontrol panel.3 Enter the copy size you want using the numeric keypad.4 Press OK to save the selection.5 Press (Stop/Clear) to return to ready mode.When you make a reduced copy, black lines may appear at the bottom ofyour copy.16ID card copyingYour machine can print 2-sided originals on one sheet.The machine prints one side of the original on the upper half of the paper andthe other side on the lower half without reducing the size of the original. Thisfeature is helpful for copying a small-sized item such as business card.
