IPv6 configuration1612. Using a Network-Connected Machine3 Press OK to select the required value you want.• DHCPv6 Addr.: Always use DHCPv6 regardless of router request.• DHCPv6 Off: Never use DHCPv6 regardless of router request.• Router: Use DHCPv6 only when requested by a router.10From the SyncThru™ Web ServiceActivating IPv61 Access a web browser, such as Internet Explorer, from Windows. Enterthe machine IP address (http://xxx.xxx.xxx.xxx) in the address field andpress the Enter key or click Go.2 If it’s your first time logging into SyncThru™ Web Service you need tolog-in as an administrator. Type in the below default ID and password.We recommend you to change the default password for securityreasons.• ID: admin• Password: sec000003 When the SyncThru™ Web Service window opens, move the mousecursor over the Settings of the top menu bar and then click NetworkSettings.4 Click TCP/IPv6 on the left pane of the website.5 Check the IPv6 Protocol check box to activate IPv6.6 Click the Apply button.7 Turn the machine off and turn it on again.• You can also set the DHCPv6.• To manually set the IPv6 address:Check the Manual Address check box. Then, the Address/Prefix textbox is activated. Enter the rest of the address(e.g.,:3FFE:10:88:194::AAAA. “A” is the hexadecimal 0 through 9, Athrough F).IPv6 address configuration1 Start a web browser, such as Internet Explorer, that supports IPv6addressing as a URL.2 Select one of the IPv6 addresses (Link-local Address, StatelessAddress, Stateful Address, Manual Address) from NetworkConfiguration Report (see "Printing a network configuration report" onpage 151).• Link-local Address: Self-configured local IPv6 address (Addressstarts with FE80).• Stateless Address: Automatically configured IPv6 address by anetwork router.
