Wireless network setup1782. Using a Network-Connected MachineIP setting using SetIP Program (Windows)This program is used to manually set the network IP address of your machineusing its MAC address to communicate with the machine. The MAC address isthe hardware serial number of the network interface and can be found in theNetwork Configuration Report.See "Setting IP address" on page 151.Configuring the machine’s wireless networkBefore starting you will need to know the network name (SSID) of your wirelessnetwork and the network key if it is encrypted. This information was set whenthe access point (or wireless router) was installed. If you do not know about yourwireless environment, please ask the person who set up your network.To configure wireless parameters, you can use SyncThru™ Web Service.Using SyncThru™ Web ServiceBefore starting wireless parameter configuration, check the cable connectionstatus.1 Check whether or not the network cable is connected to the machine. Ifnot, connect the machine with a standard network cable.2 Start a web browser such as Internet Explorer, Safari, or Firefox and enteryour machine’s new IP address in the browser window.For example,3 Click Login on the upper right of the SyncThru™ Web Service website.4 If it’s your first time logging into SyncThru™ Web Service you need tolog-in as an administrator. Type in the below default ID and Password.We recommend you to change the default password for securityreasons.• ID: admin• Password: sec000005 When the SyncThru™ Web Service window opens, click NetworkSettings.6 Click Wireless > Wizard.Wizard will help you setup the wireless network configuration. However, ifyou want to set the wireless network directly, select Custom.
