Wireless network setup1712. Using a Network-Connected Machine• Can start to build Wi-Fi Direct by using Samsung Easy Printer Manager(see "Setting up Wi-Fi Direct" on page 180).• Wi-Fi Direct Name: The default Network Name is the model name andthe maximum length is 22 characters (not including "DIRECT-XX-").• Password setting is the numeric string, and the size is 8 ~ 64 characters.11 When the wireless network set up is completed, disconnect the USBcable between the computer and machine. Click Next.12 Click Next when the Printers Found window appears.13 Select the components to be installed. Click Next.14 After selecting the components, you can also change the machine name,set the machine to be shared on the network, set the machine as thedefault machine, and change the port name of each machine. Click Next.15 If you want to register your machine with the Samusng web site andreceive useful information, click On-line Registration. If not, clickFinish.Ad hoc via USB cableIf you do not have an access point (AP), you may still connect the machinewirelessly to your computer by setting up an ad-hoc wireless network byfollowing the simple steps below.Items to prepare• Network-connected computer• Software CD that was provided with your machine• A machine installed with a wireless network interface• USB cableCreating the ad hoc network in Windows1 Check whether the USB cable is connected to the machine.2 Turn on your computer and the wireless network machine.3 Insert the supplied software CD into your CD-ROM drive.4 Click Install Now.5 Read the License Agreement, and select I accept the terms of theLicense Agreement. Then, click Next.6 Choose the option in Using Enhanced Features and Participating inPrinter Usage Information Collection Program. Then, click Next.7 Select Configure the wireless network connection using USB cableon the Printer Connection Type screen. Then click Next.8 After searching the wireless networks, a list of wireless networks yourmachine has searched appears. Click Advanced Setting.
