Samsung 4 channel DVR User Manual

Contents

English _43 USING THE DVR• CH Name : Up to 15 characters including blanks are allowed. (The first character should not be empty.) Refer to “Using Virtual Keyboard”. (Page 34)• SEQ-Dwell Time : You can set the dwell time between channels for the Live screen and Spot Out. If set to <OFF>, the channel is not listed in the Auto Sequence mode.• Screen Setup : The video appeared on the screen may varydepending on the channel’s camera, configure the DVR displayto your preferences.Select a channel and adjust the < (Brightness)>,< (Contrast)>, and < (Color)> of the selected channel.• Press the <Init> to initialize settings back to the default 50.6. When the camera setup is done, press <OK>.Storage DeviceYou can check information on storage devices.Confirming DevicesYou can check storage devices and their free space, usage as well as status.Devices available are HDD, and USB devices (Memory, HDD).Using the mouse may help make setup easier.1. Use the up/down buttons () in <Device> window tomove to <Storage Device>, and press [ENTER] button.2. Select <Device>.• No. : Shows the assigned number of the internal HDD.• Used/Total : Shows the used/total capacity of the storagedevice.• Used : Sets the storage device’s usage.- USB memory is used for backup purpose only.• Status/Management : Shows the current status of the HDD,as in Normal/Check/Replace.- Normal : Available to use- Check : Available to use but recommended to replace- Replace : Requires immediate replacement.3. To move to the previous menu, press <OK>.Screen SetupInit Apply to All CHCH1 50 50 50OK CancelStorage DeviceDevice FormatOK CancelHDD AlarmHDD MapDevice No. Used/Total Used Status/ManagementHDD 1 12.28G/499.37G Internal Normal