Samsung 4 channel DVR User Manual

Contents

42_ using the DVRusing the DVRSETTING THE DEVICEYou can setup Camera, Storage Device, Remote Device and Monitor.CameraSetting the CameraYou can set Video, Audio, Channel Name and Dwell Time of a Camera.Using the mouse may help make setup easier.1. Press the [MENU] button on the remote control.2. Use the left/right button (◄ ►) to select <Device>.Device setting menu is selected.3. Use the up/down buttons () to move to <Camera>,and press [ENTER] button.4. Select <Camera>.You will see a window where you can configure thecamera settings including Video, Audio, CH Name, SEQ-Dwell Time.5. Use direction buttons (◄ ►) to move to a desireditem, and set the value.• Video- <ON/OFF> : You can turn ON/OFF the selectedchannel’s camera.- <Covert1> : Shows information other than the video of the selected channel. For privacy protection, it does not display the video while the recording continues.- <Covert2> : Shows nothing but an empty screen while the recording continues.• Audio- If set to <ON>, you can turn the audio of the channel ON/OFF on the Live screen.- If set to <OFF>, the channel’s audio is off on the Live screen and not recorded.- For SEB-1006R (MIC integrated camera), you must connect it to CH1 and set CH1 Audio to “ON” in theCamera menu. Audio output is available for only CH1.DeviceLogout ReturnCameraStorage DeviceRemote DeviceMonitorCH Video  Audio  CH Name SEQ-Dwell Time 1 ON  OFF  CAM 01 5 sec 2 ON  OFF  CAM 02 5 sec 3 ON  OFF  CAM 03 5 sec 4 ON  OFF  CAM 04 5 sec CameraCameraScreen SetupOK Cancel