English _15 CONNECTING WITH OTHER DEVICECONNECTING THE CAMERAEquipped with the IR LED and the illumination sensor, enables you to monitor at night as well as in daytime.The camera is suitable for both internal and external use.Name Description Camera FittingGrooveGroove that is used to fit the camera bracket.There are two grooves; one on the top and one on the bottom.b IR LED These infrared LED's are controlled by the illumination sensor.c Lens Focal length of 3.6mm enables you to cover relatively longer range of monitoring. Illumination Sensor Detects incoming light to control the IR LED. DVR ConnectionCableConnect the cable directly to the DVR without using a particular power cable.You can use the RJ-45 cable to connect to a remote camera.RJ-45 Cable (Length: 18.3m, 60ft)This cable is specific to UTP connection, which is not compliant with the LAN cable. You can use the UTPdirect cable (all of 8 pins are used) to extend the length to a max of 200m. (based on UTP CAT 5e)CVBS+ 12VCVBS-N.CGND 12VGND(AUDIO)GND1. CVBS+2. CVBS-3. AUDIO4. GND5. 12V6. N.C7. N.C8. N.CSEB-1007RSEB-1005Rbc
