30_ liveliveAUDIO ON/OFFYou can turn the sound on/off corresponding to the channel in Live mode.AUDIO ON/OFF in Single modeClick the audio icon ( ) on the screen, or press the [AUDIO] button on the remote control to turn it on/off.M Only the channel where <AUDIO> is set to <ON> in “Device > Camera” displays the audio icon ( ) in Live modethat you can use to turn the sound on/off.FREEZEThis is available only in Live mode, this pauses playing the Live image temporarily.1. Press the [FREEZE] button the remote control, or click < Freeze > in the launcher menu.The playback of the image is stopped temporarily.2. Press the [FREEZE] button again, or click < Freeze >.This will release the freeze.EVENT MONITORINGThis will display the channel in sync with a specific event (Sensor/Motion/Video Loss) if it occurs.In “Monitor > Event Display”, set the event monitoring to ON/OFF and specify the event display time. (Page 46)• If multiple events occur simultaneously, the screen will switch to a split mode.- 2~4 events : 4-split mode• If the second event occurs within the set time of <Event Display>, the first event will last until the secondone is terminated. (Page 46) Ex : If you set <Event Display> to 5 seconds, and only one event occurs in CH 1.Event occurrence 5 secondsStop alarmCH1
