16_ connecting with other deviceconnecting with other deviceInstalling the cameraThe camera can be installed on the wall, ceiling, shelf or a desired position using the provided bracket.1. Select a position where you want to install thecamera. Make sure the selected position can sustain theweight of the camera.2. Use the screw bolts (M4 X L15) to mount thecamera bracket onto the wall or ceiling.3. Place the camera on the selected position and fitthe hole either on the top or the bottom of thecamera into the fixing bolt of the bracket, andturn the camera clockwise.J You should be careful when installing the BOXcamera outdoors because the cable connectorsmay be wet with moisture or pile up with impurities.Camera BracketThe camera bracket can be used to install the camera on the wall, ceiling or shelf.Camera Bracket SpecificationNameDescriptionSEB-1005R SEB-1007RUse IndoorInstallation Wall or CeilingDimensions 57(W) X 47.2(H) X 100.5(L) mm/2.25(W) X 1.86(H) X 3.95(L) inch40(W) X 58(H) X 40(D) mm/1.57(W) X 2.28(H) X 1.57(D) inchWeight 130g(0.29 lbs) 55g (0.12 lbs)Operating Temperature -10˚C ~ 50˚C (14˚F ~ 122˚F)Accessories SCREW (M4 X L15) : 3 pcsM4 X L15 sizedscrewswall or ceilingM4 X L15sized screwswall or ceilingSEB-1007RSEB-1005RSEB-1007RSEB-1005R
