LanguageYou can select a language in which to display the menu and messages. page 26DemoDemo mode automatically shows you the major functions that are included with your camcorderso that you may use them more easily.1. Touch the Menu ( ) Setting ( ) tab “%FNP”2. Touch the desired submenu item.3. To exit the menu, touch the Exit ( ) or Return ( ) tab.Submenu itemst Off : Disable the Demo function.t On: Enables the Demo function.The Demo function does not operate in the following case:- If “Auto Power Off” is set to “5 Min”and your are using the battery as the main power, the AutoPower Off function will turn the camcorder off before Demo can run.Using the Demo functionThe Demo mode is canceled in the following cases:- If the LCD screen is touched.- If any button is pressed (Recording start/stop, 2.&/6,Display ( ), SMART AUTO, MODE, PHOTO, etc.).However, the camcorder will enter the Demo modeautomatically after 5 minutes in STBY mode if it is idle for 5minutes without an operation. If you don’t want the Demofunction to start, set “Demo” to “Off”.system setting88OffOn1/1Demo6/ 6LanguageDemoAnynet+ (HDMI-CEC)Default Set
