Chat Fusion User’s Guide 38Removing or Replacing the Device FrameYour device shipped with a device frame attached. If you want to removeor replace the frame, follow these instructions. Use the small screwdriverthat was included in your Chat Fusion package.Removing the Device Frame1. Insert the tip of the screwdriver into the slot of a corner tab thatattaches the frame to the device.2. Carefully pull the tab away from the device until you can slide thecorner of the frame off the device.Important! Pull the tab only as much as necessary to detach thecorner. If you pull too far, you could break the tab.3. Once the corner is detached, pull the frame off the devicecompletely.Note: If you are replacing the device frame, proceed to Attachingthe Replacement Device Frame.
