Chat Fusion User’s Guide 36Removing the StandIf you do not want to use the stand, you can remove it from the back ofthe device.1. Position the stand so that it is not latched in place.2. Squeeze near the end of one leg with your fingers until the smallpeg disengages from the holder.3. Pull the leg up until it is completely out of the holder.4. Repeat steps 2 and 3 for the other leg.Note: Be sure to store the stand in a safe location in case you want toreattach it later.When the stand is removed, it becomes a potential hazard for chokingor for poking the eye.Reattaching the StandIf you remove the stand, you can reattach it easily at any time.1. Squeeze near the end of one leg of the stand with your fingers.2. Push the leg into the holder until the small peg snaps into place.3. Repeat for the other leg.
