Qlogic SANbox 3810 User Manual

Also see for SANbox 3810: Installation guide Interface guide Quick start guide Specifications

Contents

Qlogic SANbox 3810 User Manual Manual pdf 49 page image

Managing FabricsZoning59269-00 A 2-25ARestoring the Zoning Database from a FileDo the following to restore the zoning database from a file to a switch:1. Open the Zoning menu and select Edit Zoning to open the Edit Zoningwindow.2. Open the File menu and select Open File. A popup window will prompt youto select an XML zoning database file.3. Select a file and click Open.Reloading the Source Zoning Configuration on the SwitchDo the following to reload the original zoning database configuration to a switch:1. Open the Zoning menu and select Edit Zoning to open the Edit Zoningwindow.2. Open the File menu and select Reload from the Source.3. Click the OK button to load the original zoning database configuration to theswitch.Restoring the Default Zoning DatabaseRestoring the default zoning clears the switch of all zoning definitions.To restore the default zoning for a switch:1. Open the Zoning menu and select Restore Default Zoning.2. Click the OK button to confirm that you want to restore default zoning andsave changes to the zoning database.CAUTION!Restoring the zoning database from a file will replace the currentzoning database on the switch.CAUTION!This command will deactivate the active zone set.