2–Getting StartedSupported Configurations2-2 ISR654608-00 CTable 2-1 shows the migration rates that can be achieved for single and dualblades, depending on the bandwidth capability of the storage array.Fabric ConfigurationFigure 2-2 shows a typical setup for data migration with a dual-fabric, highavailability (HA) configuration with both array controller ports and one port fromeach iSR6200 blade connected to each fabric. This configuration enables theiSR6200 to perform load balancing.Figure 2-2. Single- and Dual-Blade High Availability SetupTable 2-2 shows the migration rates that can be achieved for a single blade,depending on the bandwidth capability of the storage array.Table 2-1. Migration Rates for Single and Dual Blade ConfigurationsArray Type Single Blade Dual Blade2Gb Fibre Channel 700GB/hour 1TB/hour4Gb Fibre Channel 1.25TB/hour 2.5TB/hour8Gb Fibre Channel 2TB/hour 4TB/hourSingleBladeDualBlade
