6–Command Line Interfacemigration addISR654608-00 C 6-27migration addSchedules a data migration job. You can enter a name for the data migration joband associate it with a job group. Scheduling options include: immediately, at apre-defined later time, or by serial scheduling. Serial scheduling requires that youassign a priority to the job that is used to schedule it prior to (lower priority value)or after (higher priority value) a specific job in the serial schedule queue of datamigration jobs.Authority miguserExamples The following example shows the migration add command used to configurean offline data migration job:iSR6200 <1> (miguser) #> migration addA list of attributes with formatting and current values will follow.Enter a new value or simply press the ENTER key to accept the current value.If you wish to terminate this process before reaching the end of the listpress 'q' or 'Q' and the ENTER key to do so.Migration Type [ 1=Offline (Local/Remote),2=Online (Local),3=Online (Remote) ] [ ] 11Index WWPN, PortId/ iScsiName, Ip Add Symbolic Name Target Type----- -------------------------------- -------------------- -------------0 50:00:1f:e1:50:0a:e1:49, 8c-02-00 HP HSV200-0 Src+Dest1 50:00:1f:e1:50:0a:37:18, 82-04-00 HP HSV210-2 Src+Dest2 50:06:01:62:41:e0:49:2e, 82-01-00 DGC RAID-2 Src+Dest3 iqn.2001-05.com., 30.30.30.2 EQLOGIC 100E-00-7 Src+Dest4 iqn.2001-05.com., 30.30.30.2 EQLOGIC 100E-00-8 Src+Dest5 50:0a:09:82:88:8c:a7:79, 61-12-00 NETAPP LUN-3 Src+DestPlease select a Source Target from the list above ('q' to quit): 0Index (VpGroup Name)----- --------------1 VPGROUP_1Please select a VPGroup for Source Lun ('q' to quit): 1LUN Vendor LUN Size( GB) Attributes Serial Number/WWULN--- ------ -------------- ---------- -------------------
