86Configure the settings relating to the schedules [Schedule]On the "Schedule" page, it is possible to configure the settings relating to schedules as follows.• Alarm permission (Alarm input will be received only in the specified schedule.)• VMD permission (Video motion detection will be active only in the specified schedule.)• Access permission (Access to the camera will be allowed only in the specified schedule.)(☞ pages 22 and 23: How to display/operate the setup menu)Up to 5 schedules can be set.Step 1Select an action to be assigned to the schedule from"Schedule mode". "Off" is selected at the default.Off: No action will be taken for the respective schedule.Alarm permission: Alarm input (terminal alarm) will bereceived during the period of the schedule.VMD permission: The Video motion detection (VMD)function will be active during the period of theschedule.Access permission: Users whose access level is set to2 and 3 on the [User auth.] tab of "User mng." page(☞ page 72) can access the camera only in the peri-od of schedule.Note:• Select "On" for "User auth." on the [User auth.] tabof "User mng." page (☞ page 72) and "Off" for"Host auth." on the "Host auth." page (☞ page 73)to validate "Access permission".Step 2Select days of a week by checking the respectivecheckboxes.Step 3Click [C] to select the start time and the end time of theschedule.When not designating time, check the checkbox of"24h".Step 4Click the [Set] button after completing the settings.→ The result will be displayed at the bottom of thewindow.Note:• The schedules displayed at the bottom of the win-dow can be identified by colors assigned to eachschedule.
