46Configure the settings relating to MPEG-4 images [JPEG/MPEG-4]Click the [JPEG/MPEG-4] tab on the "Image/Audio" page. (☞ Pages 22 and 23: How to display/operate the setupmenu)The [JPEG/MPEG-4] tab will be displayed when "MPEG-4" is selected for "Video encoding format". (☞ Page 42)Configure the settings relating to MPEG-4 image such as "Max bit rate (per client)*", "Image capture size", "Imagequality", etc. in this section.Refer to page 42 and 41 for the settings relating to H.264 images and JPEG images respectively.■ MPEG-4(1) · MPEG-4(2)[MPEG-4 transmission]Select "On" or "Off" to determine whether or not totransmit MPEG-4 images.On: Transmits MPEG-4 images.Off: Does not transmit MPEG-4 images.Default: OnImportant:• When "16:9" is selected for "Aspect ratio", MPEG-4transmission is unavailable.• When "H.264" is selected for "Recording format",MPEG-4 transmission is unavailable.Note:• When "On" is selected for "MPEG-4 transmission"in "MPEG-4 (1)", displaying of both MPEG-4 imagesand JPEG images on the "Live" page will becomeavailable.• When "On" is selected for "MPEG-4 transmission"in "MPEG-4(1)" and "MPEG-4(2)", MPEG-4 imagesare viewable using other devices with each setting.• When "On" is selected for "MPEG-4 transmission"in "MPEG-4(1)" or "MPEG-4(2)", the transmissioninterval of JPEG images may sometimes becomelonger.[Internet mode (over HTTP)]Select "On" when transmitting MPEG-4 images via theInternet. It is possible to transmit MPEG-4 images with-out changing the broadband router settings configuredfor JPEG image transmission.On: MPEG-4 images and audio will be transmittedusing the HTTP port. Refer to page 79 for furtherinformation about the HTTP port number settings.Off: MPEG-4 images and audio will be transmittedusing the UDP port.Default: Off
