74Configure the settings relating to the priority stream [System]Click the [System] tab on the "User mng." page. (☞ Pages 22 and 23: How to display/operate the setup menu)The description below is the configuration of the priority stream that can transmit images without deteriorating theimage quality and refresh interval even when multiple users access concurrently.■ Priority stream[Activation]Select "On" or "Off" to determine whether or not to usethe priority stream.Default: OffNote:• When "On" is selected for "Activation" of "Prioritystream", number of users who can access the cam-era will be limited.[Destination IP address(1)]Enter the first destination IP address.[Destination IP address(2)]Enter the second destination IP address.[Stream type]Select either "JPEG", "H.264/MPEG-4(1)" or "H.264/MPEG-4(2)".JPEG: JPEG images will be transmitted.H.264/MPEG-4(1): H.264 (1) (or MPEG-4(1)) images willbe transmitted.H.264/MPEG-4(2): H.264 (2) (or MPEG-4(2)) images willbe transmitted.Default: JPEGNote:• When "H.264" is selected for "Recording format", itis impossible to transmit H.264 (2) images.In this case, "H.264/MPEG-4(2)" is invalidated.[Refresh interval*]Select the refresh interval from the following.This setting is validated only when "JPEG" is selectedfor "Stream type".0.1fps/0.2fps/0.33fps/0.5fps/1fps/2fps/3fps/5fps/6fps */10fps */12fps (PAL models) */15fps */30fps *Default: 1fpsNote:• When "On" is selected for "H.264 (or MPEG-4)transmission", the transmission interval may be lon-ger than the set value when any value with an aster-isk (*) on the right is selected.[Image capture size]Select the image capture size from the following.This setting is validated only when "JPEG" is selectedfor "Stream type".When "4:3" is selected for "Aspect ratio"QVGA/VGA/1280 x 960 *1QVGA/VGA/800 x 600 *2When "16:9" is selected for "Aspect ratio"320 x 180/640 x 360/1280 x 720 *1320 x 180/640 x 360 *2Default: 1280 x 960 *1VGA *2*1 SP306 SP305 SF336 SF335*2 SP302 SF332
