7Important:• To enhance the security, change the password for the user name "admin". It is recommended to change thispassword periodically.• When displaying multiple H.264 (or MPEG-4) images on a PC, images may not be displayed depending on theperformance of the PC.Note:• When "H.264" is selected for "Video encoding format", H.264 video will be displayed. When "MPEG-4" isselected, MPEG-4 images will be displayed.• The maximum number of concurrent access user is 14 including users who is receiving H.264 (or MPEG-4)images and users who is receiving JPEG images. Depending on the set values for "Bandwidth control (bit rate)"and "Max bit rate (per client)", the maximum concurrent access number may be less than 14 users. When 14users are concurrently accessing, the access limit message will be displayed for users who subsequentlyattempt to access. When "Multicast" is selected for "Transmission type" of "H.264" (or "MPEG-4"), only the firstuser who accessed to monitor H.264 (or MPEG-4) images will be included in the maximum number. The secondand subsequent users who are monitoring H.264 (or MPEG-4) images will not be included in the maximum num-ber.• When "On" is selected for "H.264 transmission" (or "MPEG-4 transmission") (☞ pages 42 and 46), H.264 (orMPEG-4) images will be displayed. When "Off" is selected, a JPEG image will be displayed. It is possible to dis-play a JPEG image even when "On" is selected for "H.264 transmission" (or "MPEG-4 transmission"). In thiscase, the refresh interval of JPEG images will be limited to 5 fps.• The refresh interval may become longer depending on a network environment, PC performance, photographicsubject, access traffic, etc.When "On" is selected for "H.264 transmission" (or "MPEG-4 transmission"): 5 fpsWhen "Off" is selected for "H.264 transmission" (or "MPEG-4 transmission"): 30 fps
