Panasonic WV-NM100 Operating Instructions Manual

Also see for WVNM100 - NETWORK COLOR CAMERA: Quick reference guide Brochure & specs Operating instructions

Contents

Panasonic WV-NM100 Operating Instructions Manual Manual pdf 39 page image

39• If the preset position is not registered, you cannotadd the preset position to "Preset tour".• If a preset name is not entered, you cannot selectthe preset position. (Preset name cannot be clickedas it does not appear in the "Preset" area.)! ImportantMonitoring the Picture of a Camera in a Preset PositionYou can monitor both the still picture and the motion picture of a camera installed in a place registered as a presetposition.To monitor the image of the camera in a preset position, adjusting the position of the camera (horizontal and verticalposition) and registering the shooting location, as a preset position is required in advance.Registration of a preset positionBegin to register a preset position of the camera.Register the preset number and preset name of a preset position.Up to eight preset positions can be registered.Begin the operation from the "Control" page.The "Preset registration" area appears below the list of "Preset".Screenshot 2Screenshot 1Click "Preset Setup".STEP1Click the arrow buttons (up / down / right / left) toadjust the horizontal and vertical position of thepicture.After the adjustment of the position has beencompleted, select a preset number and enter apreset name for the preset position. And then,click the [SET] button.Characters for the preset name: 1 character to32 charactersRepeat STEP 2 to STEP 3 to register more pre-set positions.To add a registered preset position to "Presettour", check the box next to the desired presetname. (Uncheck the box to delete it from "Presettour".)Click the [SET] button after completing the set-ting.STEP4STEP3STEP2