Panasonic WV-NF302 Setup Instructions

Also see for WVNF302 - NETWORK CAMERA: Product catalog Integration note Brochure Reference Comparison chart

Panasonic WV-NF302 Setup Instructions Manual pdf 9 page image

9[OSD position]Select a position where time and date are to be dis-played on the "Live" page.Upper left: The above information will be displayed atthe upper left corner of the main area on the "Live"page.Lower left: The above information will be displayed atthe lower left corner of the main area on the "Live"page.Upper right: The above information will be displayed atthe upper right corner of the main area on the "Live"page.Lower right: The above information will be displayed atthe lower right corner of the main area on the "Live"page.Default: Upper left[Character size]Select a character size to display time and date on the"Live" page.Large: The above information will be displayed withlarge size characters.Middle: The above information will be displayed withmiddle size characters.Small: The above information will be displayed withsmall size characters.Default: Middle[Brightness status display]Select "On" or "Off" to determine whether or not to dis-play the status of brightness on images displayed on the"Live" page when adjusting brightness.On: Displays the status of brightnessOff: Does not display the status of brightnessDefault: On[Link/Access LED]Select "On" or "Off" to determine whether or not to lightthe link LED, the access LED, the SD memory carderror LED/focus assist LED.Select "On" to check the operational status by lightingthe LEDs. Select "Off" to turn off the LEDs at all times.Default: OnNotes:• Link LED: This LED will light when communicationwith the connected device is available. [Orange]• Access LED: This LED will light when accessing anetwork. [Green]• SD memory card error LED: This LED will lightwhen the SD memory card is unavailable to saveimages. [Red]• Focus assist LED: This LED will light when thefocus assist function is activated or when the indica-tion "BEST FOCUS" is displayed in the process ofthe focus adjustment using the focus assist function.[Red][Alarm status update mode]Select an interval of the camera status notification fromthe following.When the status of the camera changes, the alarmoccurrence indication button, the AUX button or the SDsaving status indication button will be displayed to notifyof the camera status.Polling (30 sec): Updates the status each 30 secondsand provide notification of the camera status.Real time: Provide notification of the camera statuswhen the status has changed.Default: Real timeNote:Depending on the network environment, notificationmay not be provided in real time.[Alarm status reception port]When selecting "real time" for "Alarm status updatemode", designate a port number to which the statuschange notification is to be sent.Available port number: 1 - 65535Default: 31004[Automatic installation of viewer software]Determine whether or not to install the viewer softwarefrom this camera.On: Installs the viewer software from the camera auto-matically.Off: The viewer software cannot be installed from thecamera.Default: On