Panasonic WV-NF302 Setup Instructions

Also see for WVNF302 - NETWORK CAMERA: Product catalog Integration note Brochure Reference Comparison chart

Panasonic WV-NF302 Setup Instructions Manual pdf 10 page image

10 SD memory card[SD memory card]Select "Use" or "Not use" to determine whether or not touse the SD memory card.Default: Not useImportant:• Before removing the SD memory card from the cam-era, it is necessary to select "Not use" first.• After inserting the SD memory card, it is necessaryto select "Use" to use the SD memory card.• When playing or downloading images saved on theSD memory card, it is necessary to select "On" for"Save logs" on the [Log] tab ( page 16) inadvance.• When the configured image refresh interval is high,timing or interval of notification or recording maybecome inexact and notification or recording maynot carried out as configured when multiple usersare receiving images. If this happened, set theimage refresh interval lower.• There are limited times to overwrite on an SD mem-ory card. When frequently overwritten, it may be atthe end of product life. It is recommended to replacethe SD memory card.[Remaining capacity notification]When the "Mail notification" function or the "Panasonicalarm protocol" function is used to provide notification ofthe remaining capacity of the SD memory card, select alevel to be notified at from the following.50 %/20 %/10 %/5 %/2 %Default: 50 %Note:Notification will be provided each time the remainingcapacity of the SD memory card reached the valuesabove.For example, notification will be provided each timethe remaining capacity reaches 50%, 20%, 10%, 5%and 2% when "50%" is selected. Notification may notalways be made at the very moment when theremaining capacity of the SD memory card hasreached each value.[Save trigger]Select a trigger to save images on the SD memory cardfrom the following.FTP error: Saves images when images have failed totransmit to the FTP server by the FTP periodicimage transmission function.Alarm input: Saves images at an alarm occurrence.Manual: Saves images manually. ( Operating instruc-tions)Default: FTP errorConfigure the settings relating to the SD memory card [SD memory card]Click the [SD memory card] tab on the "Basic" page. ( pages 4 and 5: How to display/operate the setup menu)The settings relating to the SD memory card can be configured on this page.Important:• It is impossible to display images and to receive/transmit audio between the camera and the PCwhen the viewer software "Network Camera View3"is not installed on the PC.• The number of the viewer software installations canbe checked on the [Upgrade] tab of the"Maintenance" page.