43Disc / Card Operation2 Press ▲▼ to select the time and press ENTER.• The time indicator will go off after about 5 seconds, but will turn onagain when you set the indicator.• Press ▲▼ to alter in 1-minute units. Press and hold ▲▼ to alter in10-minute units. To stop playPress STOP. To stop recordingPress STOP. Wait 2 seconds, press STOP again. To stop timer recordingPress STOP. Wait 2 seconds, hold down STOP for a fewseconds.-5 minPLAYREC To show the play images in fullPress TIME SLIP.• Press TIME SLIP to return to the picture-in-picture screen.Note:• The image on the small screen may be distorted or flicker depending onthe scene. However, this does not affect the image recorded.Recording from a video cassetterecorderPreparation• Connect a video cassette recorder to this unit’s input terminals.Notes:• When recording using this unit’s input terminals, only the sound receivedat the time of recording will be recorded. As long as secondary audio thatis recorded on the video cassette is not output on the unit in play, it is notrecorded.• Recording cannot be done when input is Component or HDMI.e.g., Connecting the L2 input terminals To skip unwanted partsPress PAUSE to pause recording. (Press again to restartrecording.) To stop recordingPress STOP.Almost all videos and DVD software on sale have beentreated to prevent illegal copying. Any software that hasbeen so treated cannot be recorded using this unit.This unitVIDEO S VIDEOIN AUDIOR LIf the audio output of the other equipment is monaural, connect toL/MONO.* The S-VIDEO terminal achieves a more vivid picture than the VIDEOterminal.Other video equipmentAudio/Video cable1 Press INPUT to select the input channel for theequipment you have connected in Stop mode.2 Press REC MODE to select the recording mode (XP,SP, LP or EP).• Using Flexible Recording (p. 39), you can save content of a videocassette to 1 disc with the best possible quality of recording withoutwasting disc space.3 Start play on the other equipment.4 Press REC.• Recording starts.YellowS-Video cable*DVD-RRAMRed White• When appears on the screen while a button is being pressed, it means that the corresponding operation is prohibited bythe unit or the disc.