Panasonic Viera TC-22LR30 Operating Instructions Manual

Also see for Combo TC-22LR30: Technical guide Service manual

Contents

Panasonic Viera TC-22LR30 Operating Instructions Manual Manual pdf 41 page image

41Disc / Card Operation1:58 SPRemaining Recording Time3/29 MON 12:53 PMTIMERRECORDINGMODEOFFONCHANNEL DATE64New Timer Program5:10 PM4:20 PM SPCHECKOKNO01 3/29 MON64 8:00 PM7:00 PM SP OK02 4/5 MONNotes:• “ ” flashes when the unit cannot go to timer recording standby (e.g., arecordable disc is not in the disc tray). Check the disc carefully.• The actual time recorded may be longer than the program itself whentelevision programs are recorded using VCR Plus+ system.• When you program successive timer recordings to start immediatelyone after the other, the unit cannot record the part at the beginning ofthe later programs (a few seconds when recording with DVD-RAM andapproximately 30 seconds when recording with DVD-R).• If you DST (Daylight Saving Time) to On when manually setting the clock(p. 23), timer recording may not work when summer switches to winter andvice versa.• When the unit is carrying out a timer recording:- You may utilize playback.• When the disc is not inserted, the disc is full or a non-recordable discis inserted, the warning message appears because Timer Recording isdisabled.• During Timer Recording, dubbing and editing are disabled.• Timer recordings are automatically placed in order of DATE → ON (StartTime).• If timer recording times overlap, the program with the earliest start timeis recorded first. The overlapped portion of the later program will not berecorded.• Press and hold ▲▼ to alter the Start (Start time) and Stop (Finishtime) in 30-minute increments.• You can also set CHANNEL (Program Position/TV Station Name),DATE (See below), ON (Start time), and OFF (Finish time) with theNUMBER keys.• You can also press REC MODE to change the recording mode.• DateDateDaily timerWeekly timerCurrent date up to one month laterminus on daySUN-SAT→MON-SAT→MON-FRIWEEKLY SUN→---→WEEKLY SAT4 Press ENTER.3 Press ► to move through the items and change theitems with ▲▼.Check to make sure “OK”is displayed.5 Press RETURN.• “ ” lights on the Front Display to indicate timer recording standbyhas been activated. To cancel recording when recording has alreadybegunHold down STOP for a few seconds.• When appears on the screen while a button is being pressed, it means that the corresponding operation is prohibited bythe unit or the disc.1:58 SPRemaining Recording Time3/29 MON 12:53 PMTIMERRECORDINGMODEOFFONCHANNEL DATE8:00 PM7:00 PM4/5 MON64Enter NameSP• Repeat steps 2~4 to program other recordings.• Enter Name:Press ◄► to select “Enter Name” and press ENTER. (p. 63)1:58 SPRemaining Recording Time3/29 MON 12:53 PMTIMERRECORDINGMODEOFFONCHANNEL DATENew Timer ProgramCHECKNOPress ENTER or VCR Plus+ tostore new program.Check, change or delete a program1 Press PROG/CHECK. To change a programPress ▲▼ to select the program and press ENTER.Press ◄► to move through the items and change the items with▲▼, then press ENTER. To delete a programPress ▲▼ to select the program and press CANCEL.• You cannot delete programs that are currently recording. To put the unit on timer recording standbyPress RETURN.• “ ” lights on the Front Display to indicate timer recordingstandby has been activated.Notes:• Programs that failed to record are displayed gray. They are automaticallydeleted from the timer recording list at 4 a.m. two days later.• During timer recording, you can change the end time as long as therecording mode is not “FR”.IconsThis program is currently recording.The times overlap those in another program. Recording of theprogram with the later start time starts when the earlier programfinishes recording.You stopped a weekly or daily timer recording. The icondisappears the next time the timer starts recording.The disc was full so the program failed to record.The material was copy-protected so it was not recorded.The program did not complete recording because the disc is dirtyor some other reason.Message displayed in the CHECK lineOK: Displayed if the recording can fit in the remaining space.→ (Date): For recordings made daily or weekly, the display will showuntil when recordings can be made (up to a maximumof one month from the present time) based on the timeremaining on the disc.! : It may not be possible to record because:• the disc is write-protected• there is not enough space left• the number of possible titles has reached its maximum.2 Press RETURN.• The timer recording list disappears.