Panasonic VL-W600BX Operating Instructions Manual

Panasonic VL-W600BX Operating Instructions Manual Manual pdf 28 page image

Programming28Adjusting the volumeRinger volumeYou can change the volume of the ringer heard when receiving calls from the door station or the camera.NTo adjust the ringer volume of the door station:During standby, press {▼} or {▲}.Each time you press {▼}, the volume level decreases.Each time you press {▲}, the volume level increases.LIf you press and hold {▼} until 2 short beeps sound, the ringer volume isset to “OFF”.NTo adjust the ringer volume of the camera:During standby, press {◄} or {►}.Each time you press {◄}, the volume level decreases.Each time you press {►}, the volume level increases.LIf you press and hold {◄} until 2 short beeps sound, the ringer volume isset to “OFF”.Speaker volumeYou can change the speaker volume. (3 levels are available.)During a call or while monitoring, press {▼} or {▲}.Each time you press {▼}, the volume level decreases.Each time you press {▲}, the volume level increases.Note:LThe ringer of the paging call sounds at the current speaker volume.Using {DOOR KEY} buttonYou can perform the operation using the sub monitor station1 To open the door, press {DOOR KEY} while monitoring image taken by the door station, talking to the mainmonitor station from the door station.LDoor opener allows you to open the door for the time specified in step 4 of the section “Setting {DOOR KEY}button” (See the Operating Instructions included with the main monitor station). “ ” is displayed in themeantime.