Panasonic VL-W600BX Operating Instructions Manual

Panasonic VL-W600BX Operating Instructions Manual Manual pdf 27 page image

Programming27Functions of the cameraThe functions listed below can be set when selecting “CAM” in step 2 on page 25. You can set the functions of thecamera 1 – 4 separately.The default setting is indicated in bolds.Functions ContentsCAM RINGER You can select the ringer pattern that is heard from the camera when the sensordetects motion.TONE A, TONE B, TONE C, TONE DLTo confirm the ringer pattern, press {►} while selecting the desired tone.CAM RINGER VOL You can select the volume of the camera ringer heard when the sensor detects motion.HIGH, MEDIUM, LOW, OFFSENSOR TYPE You can select the sensor type (INTERNAL/EXTERNAL/OFF), the interval fordetecting motion (60 SEC/20 SEC/ALWAYS) and the activation of the auto recordingfeature (ON/OFF).IN / 60 SEC AUTO REC ON, IN / 60 SEC AUTO REC OFF,IN / 20 SEC AUTO REC ON, IN / 20 SEC AUTO REC OFF,EXT / 60 SEC AUTO REC ON, EXT / 60 SEC AUTO REC OFF,EXT / 20 SEC AUTO REC ON, EXT / 20 SEC AUTO REC OFF,EXT / ALWAYS AUTO REC OFF,OFFLWhen using a device connected to the external sensor terminal, select “EXT”.IN SENSORSENSITIVITYYou can select the sensitivity of the sensor.(For information about the sensor, refer to the Operating Instructions included withthe camera.)NORMAL, LOWLThe front detection distance is about 5 m when “NORMAL” is selected, and about2 m when “LOW” is selected. (Surrounding temperature: Approx. 20 °C)LWhen the sensor detects motion excessively, select “LOW”.MIC SENSITIVITY You can select the microphone sensitivity of the camera.HIGH, MEDIUM, LOW, OFFLWhen “OFF” is selected, you cannot hear the sound from the camera.CAM RECEIVER VOL You can select the speaker volume heard from the camera during the conversationwith a sub monitor station user.HIGH, MEDIUM, LOWIN USE INDICATOR Select “ALWAYS” to turn on the IN USE indicator on the camera at all times,“CONNECTED” to turn on the indicator only when the camera is in use, or “OFF” toturn off the indicator at all times.ALWAYS, CONNECTED, OFFZOOM You can select whether the image from the camera is zooming in or not.NORMAL, ENLARGE (Approx. 1.6 x zoom)EXPOSURE The image quality is adjusted according to the exposure setting when the camera isin dark environments. You can select the following exposure levels.(Darker) -3, -2, -1, 0 (NORMAL), +1, +2, +3 (Brighter)REVERSE PICS You can select whether the image from the camera is upside down or not.YES, NOINIT SETTINGS This feature resets all settings of the camera to their default settings.YES, NO