Recording22Viewing recorded imagesYou can view or delete recorded images, or protect up to 20 images.1 During standby, press {D} and select the desired item to viewby using {▲ } or {▲}.“DOOR NEW PICS”:Recorded images taken by the door station when you did not answer calls“DOOR PICS”:All recorded images taken by the door station“CAM NEW PICS”:Recorded images taken by the camera when you did not answer calls“CAM PICS”:All recorded images taken by the cameraLItems having no recorded images are displayed in a light tone colorand you cannot select them.2 Press {D} to view the image.NTo switch to another image:Press {▲ } or {▲}.– Each time you press {▲ }, an image is displayed starting from the most recently recorded one.– If you press and hold {▲ } or {▲}, you can switch images quickly, and when you release your finger, theimage is displayed.LFor display information when viewing images, see page 23.LIf you press {◄} or {►} while the image is displayed, the image moves right and left slightly.3 To stop viewing images, press {OFF}.Protecting the recorded images1 While “PROTECT” is displayed on the monitor display, press {D}.L“ ” appears on the display.LTo release protection, press {D} again. (“ ” disappears)2 To end the operation, press {OFF}.Note:LIf you protect one of a sequence of 4 continuously recorded images, the 4 images are protected as one set. Thisset of 4 images is counted as one image.Erasing an image1 While viewing the image, press and hold {D} for 2 seconds or more.2 Press {▲ }.3 To end the operation, press {OFF}.Note:LWhen you erase 4 continuous images, “SERIES OF PICS DELETE?” is displayed. If you erase one of 4continuous images, all 4 images are erased together.{OFF}{D}{▲ } {▲ }{▲ } {▲}SERIES OF PICSDELETE?▲ YES▲ NO