Panasonic VL-SW102BX Operating Instructions Manual

Also see for VL-SW102BX: Installation guide

Contents

Panasonic VL-SW102BX Operating Instructions Manual Manual pdf 40 page image

Programming40Functions of the camera (optional)The functions listed below can be set when selecting “CAMERA” (main monitor station) or “CAM” (sub monitor station) in step2 on page 38. You can set the functions of the camera 1 – 4 separately.The default setting is indicated in bolds.[ ]: Function names when using the sub monitor station.Functions ContentsCAMERA RINGER[CAM RINGER]You can select the ringer pattern that is heard from the camera when the sensordetects motion.TONE A, TONE B, TONE C, TONE DL�To confirm the ringer pattern, press {►} while selecting the desired tone.CAMERA RINGER VOLUME[CAM RINGER VOL]You can select the volume of the camera ringer heard when the sensor detects motion.HIGH, MEDIUM, LOW, OFFSENSOR TYPE[SENSOR TYPE]You can select the sensor type (INTERNAL/EXTERNAL/OFF), the interval for detectingmotion (60 SEC/20 SEC/ALWAYS) and the activation of the auto recording feature(ON/OFF).INTERNAL (60 SEC AUTO REC ON) [IN / 60 SEC AUTO REC ON],INTERNAL (60 SEC AUTO REC OFF) [IN / 60 SEC AUTO REC OFF],INTERNAL (20 SEC AUTO REC ON) [IN / 20 SEC AUTO REC ON],INTERNAL (20 SEC AUTO REC OFF) [IN / 20 SEC AUTO REC OFF],EXTERNAL (60 SEC AUTO REC ON) [EXT / 60 SEC AUTO REC ON],EXTERNAL (60 SEC AUTO REC OFF) [EXT / 60 SEC AUTO REC OFF],EXTERNAL (20 SEC AUTO REC ON) [EXT / 20 SEC AUTO REC ON],EXTERNAL (20 SEC AUTO REC OFF) [EXT / 20 SEC AUTO REC OFF],EXTERNAL (ALWAYS / AUTO REC OFF) [EXT / ALWAYS AUTO REC OFF],OFF [OFF]L�When using a device connected to the external sensor terminal, select “EXTERNAL”.INTERNAL SENSORSENSITIVITY[IN SENSOR SENSITIVITY]You can select the sensitivity of the sensor.(For information about the sensor, refer to the Operating Instructions included with thecamera.)NORMAL, LOWL�The front detection distance is about 5 m when “NORMAL” is selected, and about2 m when “LOW” is selected. (Surrounding temperature: Approx. 20 °C)L�When the sensor detects motion excessively, select “LOW”.CAMERA MIC SENSITIVITY[MIC SENSITIVITY]You can select the microphone sensitivity of the camera.HIGH, MEDIUM, LOW, OFFL�When “OFF” is selected, you cannot hear the sound from the camera.CAMERA RECEIVER VOLUME[CAM RECEIVER VOL]You can select the speaker volume heard from the camera during the conversationwith a main monitor station user or sub monitor station user.HIGH, MEDIUM, LOWIN USE INDICATOR[IN USE INDICATOR]Select “ALWAYS” to turn on the IN USE indicator on the camera at all times, “WHENCONNECTED” (main monitor station) or “CONNECTED” (sub monitor station) to turnon the indicator only when the camera is in use, or “OFF” to turn off the indicator at alltimes.ALWAYS, WHEN CONNECTED [CONNECTED], OFFZOOM[ZOOM]You can select whether the image from the camera is zooming in or not.NORMAL, ENLARGE (Approx. 1.6 x zoom)EXPOSURE[EXPOSURE]The image quality is adjusted according to the exposure setting when the camera is indark environments. You can select the following exposure levels.(Darker) -3, -2, -1, 0 (NORMAL), +1, +2, +3 (Brighter)REVERSE PICTURES[REVERSE PICS]You can select whether the image from the camera is upside down or not.YES, NOINITIALIZATION SETTINGS[INIT SETTINGS]This feature resets all settings of the camera to their default settings.YES, NO